Email icon
info@cdms-ltd.co.uk
Call icon
0800 774 7998
Commercial Door Maintenance & Security Logo
"The Preferred Commercial Door Repair Company"
0800 774 7998
Call and speak to an engineer, not a call centre!
24/7 Fast Response | Fully Compliant | Nationwide
Menu
Temper restaurant shopfront in Soho, London with tall bronze-framed glazing, clipped bay trees in pots and the entrance door between them

Heavy-Duty Transom Closer Fitted to the Entrance Door at Temper, Soho

A restaurant entrance that is mostly glass and nearly twice the height of a person, which is a lot of weight for one closer to hold. We replaced the closer in the transom with a heavy-duty unit, renewed the worn pivot plate and set the door to close gently onto the pavement.

Read the case study
Share this jobFacebookXLinkedInWhatsAppEmail
Back

A tall glass door needs a heavy-duty closer

Temper’s Soho restaurant sits behind a run of tall bronze-framed shopfront glazing with clipped bay trees in terracotta pots along the pavement, and its entrance door is built to match: a narrow bronze frame around a single tall pane of glass, hung on a pivot in the threshold and controlled by a closer concealed in the transom above. A leaf that size carries far more weight and catches far more wind than an ordinary shop door, and the closer that had been controlling it was no longer up to the job. Temper called Commercial Door Maintenance and Security Ltd to fit a heavy-duty replacement.

With the stepladder in the doorway and the restaurant’s Christmas decorations up inside, the transom was opened and the old closer taken out. The top of the stile and the arm channel were inspected, and the pivot plate, which had rusted, was swapped for a new one; the old and new plates are photographed side by side. A heavy-duty transom closer was fitted in the head, the door re-hung on its pivot and the closing and latching speeds set so the leaf comes to rest without swinging past or slamming. The clip shows it from the pavement, opened and released.

Temper restaurant entrance in Soho with the stepladder in the doorway and the bronze-framed door open while the transom closer is replaced
Worn rusted pivot plate beside the new silver pivot plate and fixing bolts from the Temper Soho entrance door
Heavy-duty transom closer body in the head of the tall glazed entrance door at Temper, Soho

“The taller the glass, the heavier the door and the bigger the closer it needs. A standard unit on a door this size will be back on the list within the year.”

Case study · Temper, Soho

Sizing the closer to the door

Concealed closers come in strengths, and the strength is chosen from the width and weight of the leaf and from how exposed it is to wind. A tall, single-glazed restaurant entrance on a Soho street is near the top of that range: heavy because of the glass, wide because it has to look generous, and opening onto a street where the wind funnels between buildings. A standard-duty transom closer on a door like this works at its limit all the time and fails early. The heavy-duty unit fitted at Temper is built for exactly this kind of leaf, and once set it controls the door through its whole swing rather than just slowing it at the end.

The rest of the hardware matters as much as the closer. The leaf turns on a pivot in the threshold, and a heavy door bearing on a rusted pivot plate will wear the new closer out faster and can drop at the lock side. The photographs show the corroded old plate next to the new one, the pivot spindle in the threshold and the arm channel at the top of the stile, so the whole load path, from the closer in the head down to the pivot in the floor, was looked at on the same visit.

Restaurant doors in central London

Restaurant entrances in central London are usually worked on around service rather than during it, and a closer change like this one is done in a single visit between lunch and dinner or before opening. Our other Soho job, at Soho Coffee, was an emergency glass door repair; our restaurant and hospitality page covers what we do for cafés, bars and restaurants generally.

Work completed at Temper, Soho

  • Scope — replacement of the transom closer on the tall bronze-framed glazed entrance door with a heavy-duty unit.
  • Removal — old closer taken out of the transom; worn, rusted pivot plate removed.
  • Installation — heavy-duty transom closer fitted in the head; new pivot plate and fixings fitted.
  • Checks — top of stile, arm channel and threshold pivot spindle inspected.
  • Setting — door re-hung; closing and latching speeds set for the weight of the leaf.

Commercial door repairs in Soho and the West End

Commercial Door Maintenance and Security Ltd covers Soho, Fitzrovia, Covent Garden, Mayfair and the rest of the West End from our London engineers, with visits arranged before opening or between services. A photograph of the door from the street and one of the transom head is usually enough to size the closer and quote.

A heavy door, closing gently

From the pavement into the Temper entrance, past the stepladder and toolboxes inside the door, the tall glazed leaf opened and released to close under the new heavy-duty closer, then watched from inside as it settles against the frame.

Restaurant door too heavy for its closer?

Call 0800 774 7998
▶︎ Watch this video on its own page →
Project summary

At a glance — Temper, Soho

  • Client: Temper
  • Sector: Restaurants and hospitality
  • Location: Soho, London
  • Door: Tall single-leaf bronze-framed glass entrance door on a threshold pivot with a concealed transom closer
  • Fault: Existing closer not controlling the weight of the leaf; pivot plate rusted
  • Works completed: Heavy-duty transom closer fitted; new pivot plate; closing and latching speeds set
  • Outcome: Door closing under control onto the street
  • Coverage: Soho, the West End and all of Greater London
Talk to an engineer

Same-day quote from a photo — UK-wide commercial door engineers.

Send a photo and a short description of the fault and we’ll come back with a fixed-price quote the same day. Most diagnoses don’t need a site visit.

0800 774 7998 info@cdms-ltd.co.uk Send a photo
Share this case studyFacebookXLinkedInWhatsAppEmail

Project facts

ClientTemper
LocationSoho, London
Service categoryTransom Closer Repair
SectorRestaurants sector page →
CoverageUK-wide commercial door specialists — same-day quotes, time-served engineers

Compliance considerations

Concealed transom closers on commercial entrance doors must continue to deliver controlled closing and reliable latching. Where the door is also a fire or escape door, BS EN 1154 (closers) and BS EN 1125 / BS EN 179 (panic hardware) apply.

Maintenance recommendations

Transom closers are sealed hydraulic units — annual inspection plus immediate response to any visible fluid weep. Closing speed should be re-set after weather-driven frame movement (summer expansion, winter contraction).

Need similar work for your premises?

We complete transom closer repair across the UK. Send a description, photo or short video and we’ll come back the same day with a written quote — no site visit needed in most cases.

Understand the fault behind this job

Watch similar repairs

All repair videos →

Related case studies

Browse all case studies →

Call now 0800 774 7998 Same-day Quote

Get in touch

Head Office:
Commercial Door Maintenance and Security Ltd
61 Bridge Street,
Kington,
HR5 3DJ

t: 0800 774 7998
e: info@cdms-ltd.co.uk

Office Hours

Mon - Sat: 8am - 10pm
Sun: Closed

© 2026, Commercial Door Maintenance and Security Ltd. All rights reserved. · Terms of Business