Retail shopfront door questions — drops, top centres, transoms, locks, glass replacement.
A dropped retail door is almost always pivot or top centre wear. The bottom pivot takes the weight of the door and develops play; the top centre then rocks and wears further. We diagnose from photographs and a short video, then replace the worn component — the door, frame and glazing stay in place.
Pivot or top centre replacement is typically a few hundred pounds. Floor spring or transom closer replacement is more. Glass replacement on an APG door depends on the size and toughened-vs-laminated specification. Same-day written quotes are standard — we rarely need a site visit just to quote.
The top centre insert is the bushing or bearing that sits inside the top centre housing and takes the door's rotational load. With high traffic the insert wears, develops play, and the door starts to tilt or stick. Replacing the insert is a 1–2 hour job and usually restores the door without needing to replace the housing itself.
In most cases yes — most pivot, top centre, transom and lock repairs can be done with the entrance staying open via an alternative door. For full floor spring or major frame work where the door has to be lifted out, we book early-morning or out-of-hours slots so trading isn't affected.
Most diagnostics are completed remotely from a description, photo or short video — no site visit needed in most cases.
Get in touch
Head Office:
Commercial Door Maintenance and Security Ltd
61 Bridge Street,
Kington,
HR5 3DJ
t: 0800 774 7998
e: info@cdms-ltd.co.uk
Office Hours
Mon - Sat: 8am - 10pm
Sun: Closed
